9 Common Questions About Directional Drilling

How does directional drilling work?

Directional drilling is accomplished by using a special type of drill bit that can be rotated. This allows the drill to change direction as it moves through the rock. The angle of the drill bit is constantly monitored and adjusted in order to keep it on course. As the drill bit moves deeper, the angle of the well also changes. This process continues until the target depth is reached.

How accurate is directional drilling?

Directional drilling is a very precise process. In order to hit the target depth, the drill bit must be within one or two degrees of the desired angle. This can be a challenge, especially at great depths. In addition, the further the distance that the well must travel, the greater the margin of error.

What are the benefits of using directional drilling?

There are many benefits to using directional drilling. One of the biggest advantages is that it allows us to access oil and gas reserves that would otherwise be inaccessible. This type of drilling can also be used to create a pathway for pipelines and other infrastructure projects. Additionally, directional drilling is less disruptive to the environment than traditional methods of drilling.

What is directional drilling used for?

Directional drilling is used in a variety of industries, including oil and gas, water and sewer, telecommunications, and construction. It can be used to drill holes for pipelines, cable installation, and other underground infrastructure projects. It can also be used to reach reservoirs that are not horizontally accessible. When directional drilling, the good path is redirected using a kick-off point and a compass reading. The angle and direction of the good path can be changed as needed in order to reach the target reservoir.

Directional drilling is an important tool for accessing oil and gas reserves that would otherwise be inaccessible. It allows producers to drill horizontal or directional wells in order to reach reservoirs that are located at greater depths or that are hidden beneath thick layers of rock. Directional drilling can also be used to drill multiple wells from a single location, which reduces the overall cost of development.

Is directional drilling cheaper than trenching?

Directional drilling is often more expensive than trenching, but it is a more efficient process. Trenching requires a lot of digging, which can be disruptive to the environment. Additionally, trenching can be very time-consuming. Directional drilling is a more precise process that requires less digging. This makes it a more efficient method of drilling.

How much does it cost for directional drilling in Sydney?

The cost of directional drilling in Sydney can vary depending on the size and depth of the well, as well as the type of rock being drilled through. Factors that can affect the cost include the depth of the well, the length of the well, and the type of terrain. For example, directional drilling in Sydney is typically more expensive than directional drilling in rural areas.

Generally, the cost of directional drilling in Sydney is between $200 and $400 per metre.

How far can a directional drill go?

The length of the well depends on the project. For example, a directional drill for a water well might only need to go a few hundred feet. However, a directional drill for an oil or gas well can be several miles long.

What type of pipe is used for directional drilling?

Directional drilling requires a special type of pipe called drill pipe. Drill pipe is made from a variety of materials, including steel, aluminium, and fibreglass. Each type of material has its own advantages and disadvantages.

Is directional drilling the same as boring?

No, directional drilling is not the same as boring. Boring is a type of drilling that is used to create a hole for an underground tunnel. Directional drilling is used to create a hole for an underground pipeline or other infrastructure projects.

Contact the directional drilling, case and bed boring experts now

Areas serviced

Sydney Metro, Wollongong, Southern Highlands, South Coast, Central Coast, Newcastle, North Coast and all of NSW.


Mon - Fri 7am to 6pm
Sat 7am to 2pm